Digging Clay
In my last post (the clay with 0.3% absorption at cone 9 oxidation), I mentioned it comes from a low spot on top of a hill. Well, here it is.
Tag: cone 10
100% Local Clay Body
This clay comes from an odd low spot, on top of a hill on our land. Right out of the ground, it’s very silty and not plastic enough to throw, fires to above cone 8. …
Light Clay Body Test #1
This body uses one of my lighter colored clays. It’s probably more than 50% sand right out of the ground, however, it’s very easy to process, settles out of a slurry wonderfully, and de-waters quickly. …
Clay Body Test using Red Clay and Neph Sye
I haven’t been very good at keeping track of my clay tests recently. I need to blog about these as a way of keeping up with what tests I’ve run and what needs to be …
It’s getting there…
The reason I decided to switch to cone 10 reduction vs cone 6 oxidation was to limit the amount of materials I have to buy (and ship) and to reduce the amount of physical labor …
Letting go…
A customer asked me yesterday if it’s hard to let favorite pieces go. Yes, sometimes it is. But there are always pieces like this one. It’s a native clay body, and it was on the …
Firing Cone 6 Glazes to Cone 10
The day before yesterday, I did a test run of my cone 6 glazes at cone 10. The firing went a bit cool at 9.5 but close enough. However, I could not find my underglaze …
First Firing of the TDI Conversion Down Draft
Pretty pleased with the results. This is 100% Moon Clay (dug in Moon, Oklahoma), except for the one pot that slumped. That clay was from beside my house. The Moon clay has 8.2% absorption at …
Sandstone Clay Cone 10 Oxidation
This test was done Feb 2022, and I never created a blog post. Almost cone 10 in oxidation. 100% local clay. This clay froze and was a bit stiffer than I’d like. Previous workability tests …
